A battery-powered, watering timer for connection to taps that have 3/4" male threaded outputs. (Normal garden taps). This timer allows you to program watering start times & durations virtually to any schedule you could want. It has a manual over-ride on & off facility. It has an easy to read display and comes with full instructions.

(Requires one 9v alkaline battery which are not supplied.)

We recommend the use of a filter if the water to be used in your irrigation system is not a clean water source. A filter will prevent any dirt particles entering the LEAKY PIPE which could evenutally lead to a blockage. This filter contains a 10inch pleated cartridge thus ensuring the best protection possible. It is 3/4"BSP ported and is supplied with snap connectors for connection directly into your hose line. The cartridge can be easily removed for cleaning.

Filter cartridge for 10inch filter bodies

A Filter and Pressure Reducing Valve set which can be used in situations where the water source may be unclean and the pressure either too high or erratic. This unit is now supplied with a larger 10" filter cartridge and brass hosesnap fittings. Other combinations of input and output fittings are possible at no extra charge. Consider a bracket if you wish to wall-mount the unit.

A galvanised wall bracket which allows the filter to be securely fixed to the wall but still allows easy access to the filter body so that the filter cartridge may be cleaned when required.

Small round valve box with a twist down lid enabling control equipment to be protected below ground..

20 cm diameter and 23 cm deep.

A rectangular valve box which will protect any control equipment put in the ground. Complete with bolt down lid.

25cm wide x 46 cm long x 30 cm deep.

The largest in our range of underground valve boxes. Complete with bolt down lid.

46 cm wide x 63 cm long x 30 cm deep.

A larger round valve box with a twist-down lid. 33 cm diameter and 25 cm deep.