50m of Leaky Pipe LP12H porous hose. Ideal as a starter unit. Can be used as one length or cut to make several shorter sections. Arrange connections with our range of 12mm and associated barbed fittings. See selection packs of barbs designed to help connect to hosepipes. Alternatively, choose hosnap to barbed adaptor fittings if you prefer.

100m of Leaky PipeLP12H porous hose. This unit may be used as two 50m lengths or several shorter lengths. Again the layout may be designed using our range of LP12 fittings. (We do not recommend that any one lateral of Leaky Pipe is more than 50m long, but several 50m lengths may be used together). Arrange connections with our range of 12mm and associated barbed fittings. See selection packs of barbs designed to help connect to hosepipes. Alternatively, choose hosnap to barbed adaptor fittings if you prefer. Also, we recommend you have a look at watering timers and filter/pressure regulator units that can be useful to your system.

250m of Leaky Pipe LP12H for the larger garden. May be used as up to 5 lengths of 50m or tailored to a planned layout using our range of LP12 fittings. See selection packs of barbs designed to help connect to hosepipes. Alternatively, choose hosnap to barbed adaptor fittings if you prefer. Also, we recommend you have a look at watering timers and filter/pressure regulator units that can be useful to your system.

This is the largest roll of Leaky Pipe LP12H porous hose, normally available to the commecial user, is the most economic. It is to be be cut up into several shorter runs, up to 50m or less, to fit the design of the garden or site. Leaky Pipe can easily be decanted from the inside of the roll, removing the "spiral" to lay flat. Systems using this quantity are usually connected together using 20mm LDPE polytube "main". The 20mm barbed fittings and tube can be seen later in this catalogue.