The only tool you need is a pair of secateurs or sharp scissors to make up connections between 20mm polytube, 12mm polytube and Leaky Pipe!
LDPE polytube is easy to work with using simple, push-fit barbed fittings. 20mm Polytube is very useful in providing a reasonably efficient way of distributing water around a garden or small site. Smaller, 12mm polytube can also be used as a discreet way of providing a water supply to some LP12. This pipe is restrictive but will provide a handy way of providing "traces", "links" & "risers" within wide tree planting, and above ground planters. A limit of 50metres of LP12 downstream of 12mm polytube should be maintained.
12-20 Connector
20-12-20 Tee
20-20 Repairer
16-20
Joiner
(hose-20poly)
Get help on:-
Also look at:-
Leaky Pipe LP12 can also be tee-ed into the polytube to form manifolds with Leaky Pipe running away in many directions. The seal that the barbed fitting makes will be good for at least 3bar water pressure without the need of clips. The seal will also allow the fitting to rotate if required. The 20mm barbed tap below is easily used but is only designed for low pressure use & area isolation within a "system".
20mm Plug
20-20-20
Tee
20-20
Elbow
12-12
tap
20-20
tap
