MAXIMUM LENGTH FOR A SINGLE LINE OF L.P. (Water
fed in one end with other end sealed.)
LP12L
9, 14
0.75-1.O
Strictly sub-surface/ sub-mulch use. Hedging
& Mazes, Trees, long borders and turf. Excellent performance on slopes.
Low leak rate to allow for long irrigation cycles giving maximum margin
of error on watering period settings. Also good for field crops. glasshouse
cropping.
Upto 100metres*
500metres
LP12H
9, 14
2-3
Surface and sub-surface use. Commonly used
for Landscaping & Polytunnel crops. Easy to use on both small & large
schemes. Easy to D.I.Y. This is the type that is currently displayed and
sold from our online catalogue.
Up to 50metres*
200-300metres
LP12UH
9, 14
4-6
For above ground use. Pot & container watering.
Planter watering. Very responsive to water pressure. Very resistant to
salt encrustation through repetitive wet/dry cycles, surface use & very
high temperatures.
Up to
25metres*100metres
LP16H
13, 19
2-3
Will give even application along
very long individual run lengths. (More expensive than the LP12 pipes).
Not so "bendy" as the LP12 pipes. Not so popular but this format
is often seen in retail shelves.
Up
to 250metres*250-300metres
Note
The figure with the *
simply represents our recommended limit for anysingle
lateral of that type of Leaky Pipe within a system not any limit
on the size of the whole system.
Estimated
metres of Leaky Pipe that could be run from a water source of similar
strength as a typical domestic water source.
There is no limit to the complete system size
but larger systems may need to be designed fully to allow correct pumping
with or without multi-area watering control. Call us if you require
clarification regarding the above. TEL 01622 746495
All LP12 Leaky Pipes are compatible with 12mm
barbed fittings. LP16 Leaky Pipe fits 16mm barb fittings & conventional
1/2" hosepipe fittings (ie Hozelock, Gardena & C.K. types.) All fittings
and equipment is available direct from ourselves immediately on request.
Leaky Pipe is a trade marked material. E & O.E.