A full Garden Hose Kit of LeakyPipe, SupplyPipe, Timer and Connectors for the person who wants to put an automatic watering system together, really quickly!
- This 100metre package is tailored for an application that may use 100-150metres of LeakyPipe. So there's scope to add more later, should you wish. This Kit uses LP12H LeakyPipe, which is designed to be ideal for general purpose watering.
This LeakyPipe is specifically manufactured by us to work on top of the ground, if you wish, as well as sub-mulch, working up to 50metres from the barbed connections. It has proven to last in excess of ten years.
Ideal for watering beds and borders, planters, trees and hedgelines (up to 50metres long).
100metres of LeakyPipe LP12H Porous Rubber Hose.
50metres of 16mm Black Supply Pipe.
1 of Buddy1 Timer for Tap Connection. (With 16mm Compression fitting).
5 of 16-12 Reducer Connectors. (Supply to LeakyPipe).
10 of 16-12-16 Reducer Tees. (Supply-Leaky-Supply).
3 of 16-16-16 Tees. (Supply-Supply-Supply).
5 of 12-12-12 Tees. (To "Branch" LeakyPipe to itself).
15 of 12 plugs. (A tidy way to plug LeakyPipe ends).
2 of 16 plugs. (A tidy way of sealing 16 supply pipe).
2 of 12-12 connectors. (To connect Leaky-Leaky).
2 of 16-16 connectors. (To connect supply pipe to your hosepipe if you wish)
- Imagine this. Firstly, put batteries in the Buddy1 timer and screw it to your tap. (If your garden tap is conventional;, it will have a 3/4" male thread that the timer will do-up onto). Screw on the 3/4" female to 16mm compression fitting onto the bottom of the timer. (It has a male 3/4" thread, like most timers). Connect the 16mm supply pipe to the Buddy1 timer by pushing the supply pipe up into the compression fitting. (See Video). Then find a way of running the Supply tubing onto all the places you wish to water. Use the connection fittings and a pair of cutters, to tailor the tubing to give you a "Distribution Network" to carry the water to where you will be connecting the Leaky Pipe with the reducing connections. Run the LeakyPipe near to the plants, - (within 30-50cm as the water will spread laterally) and plug the ends.
(See this Video about fittings).
LeakyPipe works by wicking water into the soil it contacts and therefore works best if hoed into the topsoil or "on-the-surface" & covered by mulch.
A typical domestic water source is usually capable of charging 200-300metres of Leaky Pipe at one time. So you can do a surprising large area of discreet watering with very little effort. If you have a few minutes, why not have a look at our videos about system design, on the next tab. They should help you with your ideas.
Just a guide. In the growing season, 30-60minutes of watering per day is a good starting setting for your timer. Then tune it to your needs.
- See this narrated video on system concepts and design.
Or this silent Video about LeakyPipe layout in Gardens.