Err

contact us : 01622 746495
Your cart : 0.00
Leaky Pipe Watering Systems
Search Your Cart   Continue Shopping

Leaky Pipe Soakerhose Kit Offer - 50m

(Code: Gard_Start1)
Shopping Satisfaction
79.19
Add to cart
Leaky Pipe Soakerhose Kit Offer - 50m
  • Leaky Pipe Soakerhose Kit Offer - 50m
  • Leaky Pipe Soakerhose Kit Offer - 50m
  • Leaky Pipe Soakerhose Kit Offer - 50m

Why buy the cheepest imitation of the real thing. Spend a little more and Try this 50metre Roll of Leaky Pipe® Porous Rubber Soaker Hose with Connectors Provided.  See How it Reliably Works. 



  1. An economical package to buy and benefit from saving your plants from moisture stress, getting them to grow faster.  
    LeakyPipe® is a porous hose which weeps water along its length. Just add your hosepipe between your tap and where the Leaky is laid.  It's that simple.
    This 50metre soakahose kit will easily irrigate up to 50m as a single length.  
    Start watering here with a connector supplied.  It will allow you to cut your roll into two lengths you choose, then connect the those lengths of LeakyPipe to hosepipe & work them at once.  
    A standard household tap pressure can work up to 300m LeakyPipe at once. So you won't need the tap on much for it all to work!  
    This porous pipe is flexible so you can snake it back and forth to water your borders, beds and shrubs.  Arrange as rings or spiral around newly planted trees to aid their establishment.  
    It works most efficiently when covered by a mulch or soil as evaporation is reduced.  
    Leaky Pipe Soakahose will not perish or be affected by frost.
    Overall you use less water with LeakyPipe than watering by hand and it will work out-of-sight whilst you enjoy your garden.
  2. If you want to use a timer with this LeakyPipe® pack, Disconnect your hose from the tap. Take the hose fitting off the tap & put it on the bottom of the timer. Screw the timer onto your tap. Connect your hose to the bottom of the timer. Run the hose to the LeakyPipe connection. Snap on the green hosesnap connector to your hose. This fitting connects to two leaky pipes, which you cut to the lengths you choose. Then plug the ends of the leakies and turn the water on. All the LP will sweat at the same time. 

    Also available in 50m, 100m, 250m, 450m rolls, with and without connections.

    N.B.    This pipe is not designed to be used from a water butt without pumping.

  3. When you like what you have tried, you can expand your watering system by adding more to your 50metre Start Watering Porous Soaker-hose Kit.  

    Technical information: Leak rate of 2-3L water per linear meter per hour at 1-2 Bar.
    The video below shows some of the places LeakyPipe gets used.

Customer reviews
Shopping Satisfaction
 5/5
Great product. Quick response and arrived on time. Very satisfied.
KA.
Shopping Satisfaction
 5/5
Works fine.
John M.
Shopping Satisfaction
 4/5
A good starter kit.
Chris R.
Shopping Satisfaction
 5/5
Great pipes, save water and labour and last a long time.
Maren T.
Shopping Satisfaction
 5/5
Well done. Superb service.
Moira Q.
Shopping Satisfaction
 5/5
Good value.
Margaret C.