Vegetable Plot Watering Kit, 100m

A 100m kit of LeakyPipe and a selection of connectors, including taps to isolate rows of vegetables. 

1. A starter kit containing 100m of LeakyPipe with a high leak rate (LP12UH) and all the connectors you're likely to need to lay out a watering system, specific to your own vegetable patch. Simply cut the LeakyPipe to match the lengths of your rows with secateurs. Contains enough connectors for 15 rows of vegetables, 10 of which can have isolation taps. Also includes end plugs and 'tee's' to branch the LeakyPipe. You will need to supply some garden hosepipe or 16mm supply polypipe to act as a non-leaking header pipe, from which the LeakyPipe branches off.
   
   Connectors include:
   
   3 of 16-16-16 equal Tee (to 'Tee' hosepipe and start making a header)
   15 of 16-12-16 reducing Tee (to connect LeakyPIpe to the header)
   4 of 16 plug (seals end of hosepipe manifold)
   25 of 12 plugs (seals end of LeakyPipe)
   10 of 12mm in-line taps (to isolate rows of LeakyPipe)
   10 of 12-12-12 equal Tee (to branch LeakyPipe)
   1 of HoseSnap - 16 Tee (to connect your hose to the manifold)
   10 of short lengths of 12mm polytube for "traces" between 16-12-16 tees and 12taps
   
   
   
2. Add garden hose or 16mm black supply polypipe (LDPE) to these kits and make up an irrigation water distribution network to connect-up all the lengths of LeakyPipe you have laid in the Veg' rows.
   
   The LeakyPipe in these kits is specifically manufactured for a high leak rate. Each length of LeakyPipe should not exceed 35m in length. However, several rows of LeakyPipe can be run at once with a normal household tap pressure capable of watering a total of 300m of LeakyPipe.
   
   
3. 1