Comply with Hosepipe ban exemptions with this pre-assembled unit.  

Hosepipe bans mean garden irrigation systems cannot be used unless fitted with a "pressure reducing valve and timer".  This simple assembly can be screwed onto your garden tap output and allows you to efficiently water your garden via an exemption from the hosepipe bans.

Timer:

With a big dial to programme your watering times, this is just about the simplest timer available at a very cheap price. Two good quality alkaline AA batteries will keep this unit running all summer. 

Adjustable Pressure Regulator:

This is a device that will adjust itself to allow a suitable downstream pressure. It will do this automatically as the input pressure may vary.  You can adjust the downstream pressure using a screwdriver if necessary.

Features:

• Simple connection to your tap (3/4" thread). 
• 3/4" threads throughout 
• Hose snap output included (compatible with Hozelock type female connectors)
• Programmable by watering duration, time of day and day of week (eg twice per week)
  
• Manual bypass for easy tap use.
• Rain delay for water conservation. 
• Timer Dimensions   170mm Ht * 105mm W * 70mm D
  
• Overall Dimensions   265mm Ht  *  165mm W * 70mm D

Please bring this unit inside over winter to protect from frost damage. 

Ever-Popular, Easy to use Battery-powered watering timer for taps.
Single output.  

Automatically water your garden while you are on holiday with a simple, reliable tap timer.

Be More Efficient using our Automated Tap Timer

With a big dial to programme your watering times, this is just about the simplest timer available at a very cheap price. Two good quality alkaline AA batteries will keep this unit running unattended all summer. 

Features:

• Simple connection to your tap (3/4" thread). 
• 3/4" thread output (suitable for hose snap or compression fittings). 
• Programmable by watering duration, time of day and day of week (eg twice per week)
  
• Manual bypass for easy tap use.
• Rain delay for water conservation. 
• Dimensions   170mm Ht * 130mm W * 60mm D
  

Please bring this unit inside over winter to protect from frost damage. 

Versatile, Battery-powered timer for taps.
Connects to one tap and has Two outputs, both individually programmable.

Automatically water your garden while you are on holiday with a simple, reliable tap timer.

There's no easier way of getting two areas automatically watered from one water source at such a cheap price.  Simply take the fitting off your tap, exposing the male thread of your tap. (Please note that this has to be a 3/4" BSP thread, normally found on any, modern Garden Tap); Then screw on the Buddy2 timer.  

The two outputs of the timer can be programmed to give you differing watering times. Just attach your output fitting to those outputs and then run your piping/hose from here to the LeakyPipe, drippers or sprinklers that you've chosen to use.

Brilliantly reliable & easy to use, but do take them indoors during the Winter!

With a big dial to programme your watering times, this is just about the simplest timer available at a very cheap price. Two good quality alkaline AA batteries will keep this unit running unattended all summer.

Features:

• Simple connection to your tap (3/4" thread).
• 3/4" thread output (suitable for hose snap or compression fittings).
• Programmable by watering duration, time of day and day of week (eg twice per week)
• Manual bypass for easy tap use.
• Rain delay for water conservation.
• Dimensions.  170mm Ht * 170mm W * 60mm D

Please bring this timer inside over winter to protect from frost damage.

For outdoor use with cold water only. 

Adjustable Pressure Regulator Valve

An Adjustable Pressure Regulator is a device that will adjust itself to allow a suitable downstream pressure in your pipework/Leaky Pipe. It will do this automatically as the input pressure may vary.   It has a 3/4" BSP female input and a 3/4" BSP male output.

Comply with Hosepipe ban exemptions

Adding a pressure reducing valve beneath a tap timer ensures compliance with the exemptions from hosepipe bans. PTFE white tape should be used be connect it to the timer. To achieve this, please remove the 'cone' as per the video. Outputs (tap snaps or compressions fittings) from the PRV can seal on a compressed washer. 

Adjust the downstream pressure between 0.7-2.3Bar with a Flat Screwdriver.

Pro-quality, 16mm compression to 3/4" female threaded adaptor.

There is no more secure way of quickly attaching 16mm supply pipe to a male thread (like the one you'll find on the output of a watering timer), than with this fitting.  16mm compressions will also make a tight fit onto most Garden Hosepipes too.

No fancy tools needed to fit this adaptor!  Just a sharp cutter.    

The fitting comprises three main parts.  

A black "body”, housing an internal, rubber "O” ring  
A blue threaded collar and a White plastic, toothed split ring.  

To make "compression” connection to a pipe, firstly feed the blue collar onto the pipe.  Then push the white split collar onto the pipe, just enough for the pipe to project about 25mm from the white collar.  Now offer the end of the pipe to the fitting body.  Push the pipe into the body and you’ll feel it stop against the internal "O” ring.  With a little more push & a wiggle, the pipe will slip passed the "O” ring for a further 25mm.  This will leave the white collar, settled very close to the black body.  

All you need to do after this is simply do-up the blue collar to hold the four things together!  It doesn’t need to be tight and the brilliant thing is, you can disassemble it very easily too.  They won’t blow apart and the seal is successful by way of the "O” ring sealing on the outside of the pipe wall.  Clever, isn’t it?

Just wrap PTFE "White" tape clockwise around the Male "Mating" thread, then wind the male and female threads together, to make that connection.  Sometimes you can achieve a compression seal between these two by inserting one or two rubber, flat washers into the female part, before doing-up the Male part.

20mm Compression to 3/4" female Threaded Adaptor.
Sold Individually

Try our Reliable 3/4 Female AdaptorThere is no more secure way of quickly attaching 20mm supply pipe to a male thread (like the one you'll find on the output of a watering timer or tap) than with this fitting. 

No fancy tools needed to fit this adaptor! SOLD INDIVIDUALLY