A fully comprehensive Garden Hose Kit of LeakyPipe, SupplyPipe, Timer and Connectors for the person who wants to put an automatic watering system together, really quickly! 

Trust LeakyPipe® to water your investment. This is a great deal for 100metres of LeakyPipe, Connections, SupplyPipe; Timer to take the watering chore away from Gardening. 

This 100 metres package is tailored for an application that may use a variety of lengths from 100 to 150 metres of LeakyPipe. So there's scope to add more later, should you wish. This Kit uses LP12H LeakyPipe, which is designed to be ideal for general purpose watering. 

This LeakyPipe is specifically manufactured by us to work on top of the ground, if you wish, but it's better sub-mulch or soil, working up to 50 metres from every barbed connection. It has proven to last more than ten years. Ideal for watering beds and borders, planters, trees and hedge lines (up to 50m long). It operates under water pressures of up to 2.5 bar.    Ideal would be between 1-2Bar (15-30psi).   

High-quality items included:- 

• 100metre roll of LeakyPipe® LP12H Porous Rubber Hose.
• 50 metres of external diameter 16mm Black LDPE Supply Pipe.
• 1 of Orbit made, "Buddy One" Timer for Tap Connection. See here 
• 5 of 16-12 Reducer Connectors. (Supply to LeakyPipe).
• 10 of 16-12-16 Reducer Tees. (Supply-Leaky-Supply).
• 3 of 16-16-16 Tees.  (Supply-Supply-Supply).
• 5 of 12-12-12 Tees.  (To "Branch" LeakyPipe to itself). 
• 15 of 12 plugs. (A tidy way to plug LeakyPipe ends). 
• 2 of 16 plugs. (A tidy way of sealing 16 supply pipe).
• 2 of 12-12 hose connectors. (To connect Leaky-Leaky).
• 2 of 16-16 hose connectors. (To connect supply pipe to your hosepipe if you wish)
  

Trust the best Porous Hose, LeakyPipe®, in a Handy Kit for people with two hundred square metres of soft landscaping to water.  Buy this kit of 250m of LeakyPipe with all these connectors including HoseSnap fittings, tees and plugs to connect into your hosepipe. Especially for new & established planting in Beds and Borders.

250m of LeakyPipe and a variety of connectors to tailor a system to your own garden watering needs.  You can cut & use some of your own hosepipe with these fittings, or buy additional non-leaking polytube, "Supply" pipe.

This Kit comes with fittings that allow you to connect LeakyPipe® to either Garden Hose (and 16mm black polytube) or 20mm black polytube  .  Depending on what non-porous pipe you're using with this LeakyPipe®, select either the 16mm or the 20mm the fittings pack that is in this kit.  Please Choose from the "Supply Pipe Size" option box.

This Hose Pipe Kits is Perfect to Water a Medium Sized Garden

LeakyPipe is a porous hose which weeps water along its length. It will irrigate up to 50m as a single length, but here, the connector supplied will allow you to cut your roll appropriately, then connect two lengths of LeakyPipe to run at once.  

A standard household tap pressure can water up to 300m LeakyPipe at once. So you you should be able to make all of this work, "all at once"!     

It is reasonably flexible so you can snake it back and forth to water your borders, beds and shrubs. Arrange as rings or spiral around newly planted trees to aid their establishment. It works most efficiently when covered by a mulch or soil as evaporation is reduced.

Overall you use less water with LeakyPipe than watering by hand and it will work out-of-sight whilst you enjoy your garden. 

Connectors Included in the 250m Hose Pipe Kit:
- Two, HoseSnap-12 (LeakyPipe) straights.
- Two, HoseSnap to 12 (LeakyPipe) tees.
- Ten, Plugs for Leaky Pipe.
- Five, 16-12 or 20-12 (Hose to LeakyPipe) straights.
- Six, 16-12-16 or 20-12-20 Reducing Tees, (Hose to LeakyPipe).
- Five, 12-12-12equal tees (Leaky-Leaky).
- Four, 12-12 (LeakyPipe to LeakyPipe) connectors.

N.B. This pipe is not designed to used from a water butt, without pumping.   But it works really well with a timer!

See this short video about using connectors.


See this narrated video on system concepts and design.

Or the silent video about LeakyPipe layout in Gardens on the videos tab 

A full 250m Garden Hose Kit including LeakyPipe®, non-porous Supply Pipe, Timer and Connectors

Spend a bit more and buy the best LeakyPipe; from the people who have made it the longest. A great deal for 250metres of LeakyPipe, Connections, SupplyPipe and two-zone Timer.

Ideal for the person who wants to put an automatic watering system together, really quickly!   

Stop dragging garden hose pipe around and look no further. Leaky Pipe Systems has been manufacturing for years, the best irrigation systems including this 250m garden hose kit. 

This 250metre package is tailored for an application that may use 250-500metres of LeakyPipe. So there's scope to add more later, should you wish. This Kit uses LP12H LeakyPipe®, which is designed to be ideal for general purpose watering. 

Our 250m Garden Hose Kit is an innovative, professional system

This LeakyPipe 250metre hose pipe kit is specifically made by us to work on top of the ground, if you wish, as well as sub-surface, sub-mulch; working up to 50metre lengths from the barbed connections to hose or polypipes. Designed for professionals, it will bring you full satisfaction. Our customers already love it and it is part of our best-selling garden hose pipe kits. Just give it a try!

✔ The 250m garden hose kit has proven to last in excess of ten years.

This one is ideal for watering beds and borders, planters, trees and hedgelines (LP use, up to 50metres long). Although we have specific hedge watering kits that will perfectly do the job, when they are over 100metres long.

Buying LeakyPipe 250m hose pipe kit, you will also have the following items

- 250 metres of LeakyPipe LP12H Porous Rubber Hose.
- 100 metres of 16mm Black Supply Pipe.
- 1 of Buddy2 Timer for Tap Connection (With two 16mm Compression fittings).here

- 5 of 16-12 Reducer Connectors (Supply to LeakyPipe).
- 20 of 16-12-16 Reducer Tees (Supply-Leaky-Supply).
- 3   of 16-16-16 Tees (Supply-Supply-Supply).
- 5 of 12-12-12 Tees (To "Branch" LeakyPipe to itself). 
- 20 of 12 plugs (A tidy way to plug LeakyPipe ends).
- 2 of 16 plugs (A tidy way of sealing 16 supply pipe).
- 5 of 12-12 connectors (To connect Leaky-Leaky).
- 2 of 16-16 connectors (connect Supply Pipe to your hosepipe if you wish)

Save your plants and your time, now.      Use 250m Kit of The Original Leaky Pipe® Porous Soaker Hose and Connectors. 

250m Hedge Watering Kit with Leaky Pipe LP12L and Connectors.

It’s slow porosity is designed for sub-surface use. So after you’ve seen it working, cover it with soil, mulch or well-rotted manure.  You can "plant" it at the same time as you plant your Hedge plants.   It actually works better that way!

✔ Protect your investment in hedge plants with LeakyPipe® sub-surface watering hose
✔ Just lay on the soil, see it work, then cover with mulch or hoe into the topsoil. It will last for years
✔ Recommended by Professional Landscape Contractors

This 250m roll of LeakyPipe LP12L porous rubber hose kit with connectors is specifically manufactured by us to carry water further and water at a low rate, workin up to 100metres from the hose or supply pipe connection.

What's included in this Hedge Watering Kit?

This hedge watering kit has HoseSnap connectors for fast hook-up to your hose. Also some tees and plugs to allow you some connection options. All you need is a pair of sharp scissors to cut the leaky pipe and fit it to your hedge planting layout.

Ideal for watering in new hedge planting, ensuring rapid establishment and fast growing-on.

Connectors include:

- 2 of HoseSnap to straight connector (for one LeakyPipe® length); 
- 2 of HoseSnap to tee connector (for two lengths of leaky pipe);
- 10 of 12mm end plugs; To seal ends of LeakyPipe®
- 5 of 12-12-12mm tees to be able to branch the leaky pipe;
- 10 of 16-12 reducer connectors (in case you need to span pathways with hosepipe between leaky pipes)

For even more irrigation systems, discover our full range of Leaky Pipe Watering Kits!

How and where to use this Hedge Watering Kit?

This is a great deal for raised borders, raised troughs or planters with a total area of up to 50m2. Kits includes push-fit connectors and options for Supply Pipe.

A comprehensive Kit to discreetly water up to 50m2 of raised beds or planters. Customise your kit by selecting sufficient connectors for 5-10 raised beds and choose between several options for supply pipe.

This kit includes lots of push-fit 'elbow' connectors to help fit an irrigation system to existing raised beds, borders, planters and troughs. You will need non-leaking supply pipe to carry the water up and over the wall of your bed. You can choose supply pipe to be included in your kit, or use small amounts of 1/2" garden hosepipe, which will also work with the connectors. Once at soil level, the pipe size 'reduces' down to that of LeakyPipe.  

The LeakyPipe can be laid on the surface or covered in mulch which helps water wicking away from the LeakyPipe. Arrange the LeakyPipe around your plants. Moisture spreads outwards for about 12 inches / 30cm either side. If you need to branch the LeakyPipe within the bed, 'tee' connectors are included, as are 'plugs' for the ends of LeakyPipe. A nail-in pipe clip keeps the pipe neatly in place on top of the wall of your raised bed / border. Lastly, a quick-connect hose-snap connector will allow connection to your garden hose.  

This Kit includes a 100m roll of LP12H LeakyPipe, which is designed to be ideal for general purpose watering, working up to 50metres from the barbed connections.  It has proven to last in excess of ten years.

How to customise your kit 

1. Select the number of raised beds you have
2. Select if you would like any supply pipe (size and length). The fittings will be adjusted to ensure they are compatible with your selection.
3. Double check the total area of your beds do not exceed 50m2 - this will ensure that 100m of LeakyPipe at 50cm spacing is sufficient for your beds.

Items included:

• 100m roll of LeakyPipe LP12H Porous Rubber Hose.
• 3 of 16-16-16 tees. (allows branching of the supply pipe network) 
• 2 of 16 elbows. (may be useful for supply network) 
• 4 of 16 plugs. (A tidy way of sealing supply pipe or garden hose). 
• 2 of 12-12 connectors.  (To connect Leaky-Leaky, a useful repairer).
• 1 of HoseSnap to 16mm single connector (quick snap-on connection to regular garden hose)

Each bed will get an additional set of:

• 1 of 16-16-16 tee. (To branch supply pipe up behind your bed)
• 3 of 16 elbows (To bring supply pipe neatly over the wall of the raised bed)
• 1 of 16-12 reducer (To reduce pipe size to that of LeakyPipe)
• 1 of 12-12-12 tee (To branch LeakyPipe within the bed)
• 2 of 12 plugs (to seal the end of LeakyPipes)
• 1 of nail-in pipe clip (To keep supply pipe neatly in place on top of the retaining wall)

Imagine this.   Firstly, find a way of running the Supply tubing onto all the places you wish to water.  Use the Tee connection fittings and a pair of cutters, to tailor the tubing to give you a "Distribution Network" to carry the water to where you will be connecting the Leaky Pipe with the reducing connections.  Run the LeakyPipe near to the plants, - (within 30-50cm as the water will spread laterally) and plug the ends. (See this Video about fittings).

A discounted kit for watering raised borders, raised troughs or planters with a total area of up to 50m2. Create a professional finish with all pipework concealed during construction of the beds. Kits are customisable for the number of raised beds and size of supply pipe.

A Kit created for landscape constructors to incorporate watering facilities during the construction of raised beds or planters. The Kits comprises professional leak-free compression fittings and sufficient LeakyPipe to irrigate up to 50m2 of raised beds, planters or troughs. 

This kit is designed to be installed at the construction stage of creating raised beds. The fittings allow water to be brought up inside the bed or planter via a 'riser' to the surface of the soil.  This gives a neat, clean professional look. The 'network' or supply pipe is best created with 20mm or 25mm blue MDPE pipe. The blue pipe isn't included in the kit, but a tee and elbow compression fittings are included to help you create the network. Once at soil level, an elbow fitting allows LeakyPipe to be laid on the surface or covered in mulch which helps water to wick away from the LeakyPipe. Arrange the LeakyPipe around the plants. Moisture spreads outwards for about 12 inches / 30cm either side. The free ends of the LeakyPipe are sealed with the included 'plugs'.  

In planning your system, think about how you want to create a network of supply pipe to carry water to each of the beds. 20mm or 25mm blue MDPE pipe is ideal for burying underground. MDPE pipe isn't included in this kit, but a tee and elbow compression fittings are included to help you create the network.  Also included is a fitting to connect to your water source - options here include a compression-3/4" adaptor to create a leak-free connection with the bottom of a timer or 3/4" tap thread OR a compression to HoseSnap fitting to allow quick hook-up to standard HoseSnap fittings on normal garden hosepipe. 

This Kit includes a 100m roll of LP12H LeakyPipe, which is designed to be ideal for general purpose watering, working up to 50metres from the barbed connections.  It has proven to last in excess of ten years.

How to customise your kit.

1. Select the number of raised beds you have
2. Select the supply pipe size you intend to use. The fittings will be adjusted to ensure they are compatible with your selection.
3. Choose a hook-up option, dependent on how you plan to feed water into the pipework.
4. Double check the total area of your beds do not exceed 50m2 - this will ensure that 50m of LeakyPipe at 50cm spacing is sufficient for your beds.

Items included:

• 100m roll of LeakyPipe LP12H Porous Rubber Hose.
• 1  of 20/25 compression to 3/4" female fitting OR 20/25 compression to HoseSnap fitting
• 1  of 20/25 compression tee.   (for branching of supply network)
• 1  of 20/25 compression elbow.  (for riser within terminal bed)
• 2  of 12-12 connectors.  (To connect Leaky-Leaky, a useful repairer).

Each bed will get an additional set of:

• 1 of 20/25 compression tee. (To branch supply pipe up as a riser within each bed)
• 1 of 20/25 compression elbow to LeakyPipe tee (To allow connection to 2 LeakyPipe lengths within each bed)
• 2 of 12 plugs (to seal the end of LeakyPipes)

Imagine this.   Firstly, find a way of running the Supply Pipe onto all the places you wish to water.  Use the compression fittings to tailor the pipe to give you a "Distribution Network" to carry the water to each raised bed.  Compression tee under each bed will allow creation of a 'riser' to bring the water to the surface of the soil.  Here you will be connecting the Leaky Pipes via the compression elbow.  Run the LeakyPipe near to the plants, - (within 30-50cm as the water will spread laterally) and plug the ends. (See this Video about fittings).

 

100m of LeakyPipe and connectors to water several rows of vegetables (including 10 isolation taps)

A 100m kit of LeakyPipe and a selection of connectors, including taps to isolate rows of vegetables. 

A starter kit containing 100m of LeakyPipe with a high leak rate (LP12UH) and all the connectors you're likely to need to lay out a watering system, specific to your own vegetable patch. Simply cut the LeakyPipe to match the lengths of your rows with secateurs. Contains enough connectors for 15 rows of vegetables, 10 of which can have isolation taps. Also includes end plugs and 'tee's' to branch the LeakyPipe. You will need to supply some garden hosepipe or 16mm supply polypipe to act as a non-leaking header pipe, from which the LeakyPipe branches off.

Connectors include:

• 3 of 16-16-16 equal Tee (to 'Tee' hosepipe and start making a header)
• 15 of 16-12-16 reducing Tee (to connect LeakyPIpe to the header)
• 4 of 16 plug (seals end of hosepipe manifold)
• 25 of 12 plugs (seals end of LeakyPipe)
• 10 of 12mm in-line taps (to isolate rows of LeakyPipe)
• 10 of 12-12-12 equal Tee (to branch LeakyPipe)
• 1 of HoseSnap - 16 Tee (to connect your hose to the manifold)
• 10 of short lengths of 12mm polytube for "traces" between 16-12-16 tees and 12taps

Add garden hose or 16mm black supply polypipe (LDPE) to these kits and make up an irrigation water distribution network to connect-up all the lengths of LeakyPipe you have laid in the Veg' rows.

Ingenious, time saving, Travelling Lawn Sprinkler by Nelson

Self-propelled, Travelling Sprinkler System for large gardens and areas of grass.

Made by Nelson. Improved by us.

This is a great tool made in the USA by Nelson. It's useful to those who have a large area of lawn & desire an easy and cheap way of watering it without too much effort. Look no further! It's a garden sprinkler that moves itself.

Versatile, Battery-powered timer for taps.
Connects to one tap and has Two outputs, both individually programmable.

Automatically water your garden while you are on holiday with a simple, reliable tap timer.

There's no easier way of getting two areas automatically watered from one water source at such a cheap price.  Simply take the fitting off your tap, exposing the male thread of your tap. (Please note that this has to be a 3/4" BSP thread, normally found on any, modern Garden Tap); Then screw on the Buddy2 timer.  

The two outputs of the timer can be programmed to give you differing watering times. Just attach your output fitting to those outputs and then run your piping/hose from here to the LeakyPipe, drippers or sprinklers that you've chosen to use.

Brilliantly reliable & easy to use, but do take them indoors during the Winter!

With a big dial to programme your watering times, this is just about the simplest timer available at a very cheap price. Two good quality alkaline AA batteries will keep this unit running unattended all summer.

Features:

• Simple connection to your tap (3/4" thread).
• 3/4" thread output (suitable for hose snap or compression fittings).
• Programmable by watering duration, time of day and day of week (eg twice per week)
• Manual bypass for easy tap use.
• Rain delay for water conservation.
• Dimensions.  170mm Ht * 170mm W * 60mm D

Please bring this timer inside over winter to protect from frost damage.

For outdoor use with cold water only. 

Three-way cast metal Garden Tap connection

A quality metal fitting to give you three hosesnap outputs.

Do you need more from your Garden Tap?    
Frustrated by hooking things on and off?    

Convert your single garden tap output into three individually controllable outputs - perhaps one or two for your LeakyPipe system and the other for filling buckets or connecting your hosepipe?

Unscrew your existing hosesnap connector and screw on this fitting. Comes with brass snap outputs which accept conventional 'hoselock-type' connectors.

The Big Bonus is If you want to connect a timer, remove the male output fitting, fit the timer and replace the male output fitting on the bottom of your timer

250m Roll of Leaky Pipe Porous Rubber Soaker Hose (LP12H)

The Best Quality 250m Porous Hose Pipe Available in the UK.

We manufacture LeakyPipe irrigation systems to Ensure High Standards.

LP12H General Purpose LeakyPipe is a porous hose which weeps water along its length. It will irrigate 50m lengths of pipe, although several lengths can be watered at once. A standard household tap pressure can water up to 300m LeakyPipe at once. It will not perish or be affected by frost. It is reasonably flexible so you can snake it back and forth to water your borders, beds and shrubs. Arrange as rings or spiral around newly planted trees to aid their establishment. It works most efficiently when covered by a mulch or soil as evaporation is reduced. Overall you use less water with Leaky Pipe systems than watering by hand and it will work out-of-sight whilst you enjoy your garden.

250m long porous hose pipe for optimal garden irrigation

Available in 50m, 100m, 250m, 450m rolls.

20mm black polytube, available in 50m or 100m rolls

Non-porous 20mm pipe to deliver water from its source to the areas you want to water.

50m or 100m roll of a larger diameter black, non-porous, semi rigid plastic pipe, suitable as a permanent feeder pipe for your irrigation system. This pipe is easily cut with a sharp pair of cutters and is compatible with our range of '20' barbed fittings.  The fittings can be gently wiggled into the polytube and will grip on the internal surface without the need for additional clips.  In very cold weather, if it is difficult to insert fittings, try dipping the end into a thermos flask of hot water for about 10 seconds and this will soften the pipe slightly. As the pipe cools, it will shrink onto the barbed fittings.  Fittings can be rotated in the polytube without breaking the seal.

This LDPE (Low Density PolyEthylene) pipe is 20mm external diameter.

20mm Compression to 3/4" female Threaded Adaptor.
Sold Individually

Try our Reliable 3/4 Female AdaptorThere is no more secure way of quickly attaching 20mm supply pipe to a male thread (like the one you'll find on the output of a watering timer or tap) than with this fitting. 

No fancy tools needed to fit this adaptor! SOLD INDIVIDUALLY

Large selection pack of 30 connectors.
Connects LeakyPipe to 16mm or 20mm supply pipe or garden hose.

A selection of 30 barbed fittings which will enable a wide range of design layouts to be made up to suit your individual design needs, using LeakyPipe and 1/2" hosepipe, 16mm or 20mm polytube supply pipe. The small ends of the fittings connect to LeakyPipe (12mm). You can choose the larger size end: size 16 will fit 1/2" garden hosepipe or 16mm supply pipe, size 20 will fit 20mm supply pipe. 

This pack is suggested to be used with a 100m roll of LeakyPipe in terms of providing a good range and number of fittings that you may want for setting up an irrigation system. If you have 50m roll of LeakyPipe, consider a small selection pack. 

Pack contains:

• Three - Large Equal Size Tee, (size 16 or 20)
• Two - Large Equal Size Elbows (size 16 or 20)
• Six - Reducing Tee, (size 16/20 to Leaky)
• Five - Reducing Straight, (size 16/20 to Leaky)
• Five - Equal size 12-12-12 Tee. (for branching Leaky in T shape)
• Four - 12-12 straight connector, (Leaky to Leaky).
• Five - 12mm end plugs for sealing the LeakyPipe ends.

Pack of compression fittings to create 'risers' to bring water up inside raised beds, planters, troughs or containers. Designed for use at the construction stage of building raised beds to create a neat look without pipes showing. Suitable for professional use in shared space communal areas or home domestic modern gardens. Compression fittings create reliable secure leak-free connections in areas that are difficult to access at a later date for maintenance. Compression fittings are compatible with blue 'mains' MDPE pipe or black LDPE pipe.

During construction, a 'riser' is created within the raised bed. At the soil surface, the compression elbow fitting will bring the pipe work level with the soil surface and allow connection to 2 lengths of LeakyPipe with simple push-fit barbed fittings. The LeakyPipe is laid amongst your plants on the surface of the soil or under a shallow layer of mulch/soil.  The LeakyPipe ends are sealed with the included plugs.  Overall this gives a neat look as the riser pipe and LeakyPipes will get covered by soil and not be visible.

Compression fittings are ideal for use in situations that would be difficult to access for maintenance at a later date.  These are great quality compression fittings and are the ones we choose to use ourselves, owing to their reliability.

Options include size 20mm or 25mm supply pipe.  Choose which size you would like and all connectors will automatically be swopped to your chosen size.

• One 20 or 25 compression Tee.  (allows branching to the supply pipe to create a 'riser')
• One 20 or 25 compression elbow to 12 barbed connector (allows connection to 2 lengths of LeakyPipe)
• Two 12 end plugs (for sealing the LeakyPipe ends).

Tap for 20mm supply pipe

A simple tap which allows isolation of areas from your irrigation system. Sold as single unit.

Available in 3 sizes as shown:

• 12mm - fits LeakyPipe®
• 16mm - fits 16mm polytube or garden hosepipe
• 20mm - fits 20mm polytube

These taps allow areas of your watering system to be switched on or off as required. 12mm size allows a section of LeakyPipe to be turned off e.g. a row on a vegetable patch. 16mm or 20mm allow a whole section or your irrigation system to be shut down e.g. a particular border awaiting planting. They have a barbed push-fit connection and clips are not needed. 

Please note these are NOT designed to hold back full (static) mains pressure

Easy to use Battery-powered Watering Timer for Garden Taps.

Single output. Now, we do have stock of this timer.

Automatically water your garden while you are on holiday with a simple, reliable tap timer.

Surely the Easiest Tap Timer to Use

Similar to the great-value "Buddy” range, but with a heavier-duty brass input connection and better flow characteristics.  With a big dial to program your watering times, this is just about the simplest timer available at a very cheap price. Two good quality alkaline AA batteries will keep this unit running unattended all summer. 

Features:

• Simple connection to your tap.
• 3/4" thread output (suitable for hose snap or compression fittings).
• Programmable by watering duration, time of day and day of week (eg twice per week)
• Manual bypass for easy tap use.
• Rain delay for water conservation.
• 170mm High by 130mm wide by 60mm deep

Please bring this unit inside over winter to protect from frost damage. 

Hozelock-type fitting which allows easy make / break connections with 20mm supply polypipe.

These clip on/off connectors are familiar to most gardeners and are the simplest way of bringing your water supply to the LeakyPipe network you have laid out. It connects to the non-leaking supply polypipe which links your system together.  Easily connect your hosepipe to the LeakyPipe system when you want to water, and disconnect it when you want to use your hose for something else.

Choose the number of outputs you would like; 

• Straight - connects to one 20mm supply pipe
• Tee - connects to two 20mm supply pipes.
  

SOLD INDIVIDUALLY