89 products
89 products
Sort by:
Products
16mm Compression Tee
16mm Compression Tee for permanent, secure, leak-free connections in 16mm black LDPE supply polypipe and (with some difficulty), Garden Hose.
16mm Compression Tee for permanent, secure, leak-free connections where it will be deeply buried on the connection won't be easily accessible.
Pro-quality, 16mm compression to 3/4" female threaded adaptor.
There is no more secure way of quickly attaching 16mm supply pipe to a male thread (like the one you'll find on the output of a watering timer), than with this fitting. 16mm compressions will also make a tight fit onto most Garden Hosepipes too.
No fancy tools needed to fit this adaptor! Just a sharp cutter.
The fitting comprises three main parts.
A black "body”, housing an internal, rubber "O” ring
A blue threaded collar and a White plastic, toothed split ring.
To make "compression” connection to a pipe, firstly feed the blue collar onto the pipe. Then push the white split collar onto the pipe, just enough for the pipe to project about 25mm from the white collar. Now offer the end of the pipe to the fitting body. Push the pipe into the body and you’ll feel it stop against the internal "O” ring. With a little more push & a wiggle, the pipe will slip passed the "O” ring for a further 25mm. This will leave the white collar, settled very close to the black body.
All you need to do after this is simply do-up the blue collar to hold the four things together! It doesn’t need to be tight and the brilliant thing is, you can disassemble it very easily too. They won’t blow apart and the seal is successful by way of the "O” ring sealing on the outside of the pipe wall. Clever, isn’t it?
Just wrap PTFE "White" tape clockwise around the Male "Mating" thread, then wind the male and female threads together, to make that connection. Sometimes you can achieve a compression seal between these two by inserting one or two rubber, flat washers into the female part, before doing-up the Male part.
A Screw-on pipe clip for wall mounting 16mm polypipe
What can we add? It’s self-explanatory. This is a great clip for retaining metric polypipes on brick walls or timber fences. Just use a suitable screws and plugs as necessary.
Pipe clips can be clipped together if you wish to run several parallel pipes.
20mm Compression Fitting - 16mm barbed connector (1 and 2 output options)
Connect 20mm blue 'mains' pipe to 1 or 2 outputs of 16mm supply polypipe or garden hose.
Use these compression fittings where the water is supplied to the garden in 20mm blue MDPE 'mains' pipe. (They will also work just as well with 20mm LDPE Black polytube Supply Pipe). The output end is a barbed fitting which simply pushes onto 16mm supply polypipe or 1/2"garden hosepipe.
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal.
Choose 1 straight or 2 'tee' outputs from the drop-down menu above.
The following outputs are also available:
12 - fits LeakyPipe as single or double output. CLICK HERE
20 - fits 20mm polytube as single or double output. CLICK HERE
All connectors also available as an elbowed compression fitting. CLICK HERE
To connect 16mm LDPE supply polytube, direct to 20mm "BLUE" MDPE polytubes. A very positive connection.
20mm Compression to 20mm barbed connector (1 or 2 output options)
Connect 20mm blue 'mains' pipe to 1 or 2 outputs of 20mm "supply" LDPE black polypipe.
Use these fittings where the water is supplied to the garden in 20mm blue MDPE 'mains' pipe. The output end is a barbed fitting which simply pushes onto 20mm supply polypipe.
The following outputs are available:
12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal.
To connect 20mm supply LDPE polypipe direct to 20mm "BLUE" MDPE polytubes. A very positive connection.
20mm Compression Fitting with connections for LeakyPipe LP12 range.
(One or Two output options available for attaching one or two LeakyPipes)
Connect 20mm blue 'mains' MDPE pipe, to One output to LeakyPipe. Also works with 20mm LDPE Black polytube instead of Blue MDPE tube.
Use these compression fittings where the water is supplied to the garden in 20mm blue MDPE 'mains' pipe. The output end is a barbed fitting which simply pushes onto the LeakyPipe.
Available for one or two LeakyPipe outputs - select from the "Outputs" option box above.
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal. High Quality Unidelta brand
Larger outputs are also available.
16 - fits 16mm polytube as single or double output. CLICK HERE
20 - fits 20mm polytube as single or double output. CLICK HERE
20mm Compression Tee Fitting with 16mm barbed connection to LDPE black polytube. (1, 2 output options)
Tee into a line of 20mm blue 'mains' MDPE pipe to one or two 16mm black polytube "supply” pipes. Just select which you need.
Use these compression fittings where the water is supplied to the garden in 20mm blue MDPE 'mains' pipe. The output end is a barbed fitting which simply pushes onto the 16mm black LDPE polytube, that will carry the water further into your system..
Available with one or two outputs - select from the menu above.
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal.
The following outputs are also available.
12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output
High Quality Unidelta brand
20mm Compression to LeakyPipe® connector
(To one or two lengths of Leaky Pipe options)
Connect one or two LeakyPipe lines into a length of 20mm blue MDPE 'mains' pipe
Use these fittings where the water is supplied to the garden in 20mm blue MDPE 'mains' pipe. The output end is a barbed fitting which simply pushes onto the LeakyPipe. See our video help on using compression fittings.
The following outputs are available.
12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal
20mm Compression Elbow Fitting
20mm compression elbow for permanent, secure, leak-free 90 degree bends in 20mm black LDPE supply polypipe or 20mm blue MDPE pipe.
Secure connection, seals on the external surface of pipe.
20mm Compression Elbow to 16mm barbed connector.
(1 or 2 output options)
Connect 20mm blue 'mains' pipe to 1 or 2 outputs of 16mm supply pipe or garden hosepipe.
Use these fittings where the water is supplied to the garden in 20mm blue MDPE 'mains' pipe. The compression fitting is elbowed so that outputs are at 90degrees, very useful when the blue pipe is vertical as a 'riser' pipe. The output end is a barbed fitting which simply pushes onto the 16mm supply polypipe or 1/2" garden hosepipe..
The following outputs are available:
12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal.
20mm Compression Elbow to 20mm barbed connectors.
(1 or 2 output options)
Connect 20mm blue 'mains' pipe to 1 or 2 outputs of 20mm supply pipe.
Use these fittings where the water is supplied to the garden in 20mm blue MDPE 'mains' pipe. The compression fitting is elbowed so that outputs are at 90degrees, very useful when the blue pipe is vertical as a 'riser' pipe. The output end is a barbed fitting which simply pushes onto 20mm supply polypipe.
The following outputs are available:
12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal.
20mm Compression Elbow to LeakyPipe connector.
(1 or 2 output options)
Connect 20mm blue 'mains' pipe to One or Two outputs of LeakyPipe.
Use these fittings where the water is supplied to the garden in 20mm blue MDPE 'mains' pipe. The compression fitting is elbowed so that outputs are at 90degrees, very useful when the blue pipe is vertical as a 'riser' pipe. The output end is a barbed fitting which simply pushes onto the LeakyPipe.
The following outputs are available:
12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal.
20mm Compression Straight Couple Fitting
20mm compression couple for permanent, secure, leak-free connections in 20mm black LDPE supply polypipe and blue MDPE pipe.
Secure connection, seals on the external surface of pipe.
Fits 20mm black LDPE supply polypipe click here to buy
Fits 20mm blue MDPE supply pipe
20mm compression Straight for reliable, secure, leak-free connections in 20mm black LDPE supply polypipe and blue MDPE pipe.
20mm Compression Tee
20mm Compression Tee for permanent, secure, leak-free connections in 20mm black LDPE supply polypipe and blue MDPE pipe
20mm Compression Tee for permanent, secure, leak-free connections in 20mm black LDPE supply polypipe and blue MDPE pipe
20mm Compression to 3/4" female Threaded Adaptor.
Sold Individually
Try our Reliable 3/4 Female AdaptorThere is no more secure way of quickly attaching 20mm supply pipe to a male thread (like the one you'll find on the output of a watering timer or tap) than with this fitting.
No fancy tools needed to fit this adaptor! SOLD INDIVIDUALLY
20mm Compression to 3/4" BSP Male Threaded Adaptor.
There is no more secure way of quickly attaching 20mm supply pipe to a female thread than with this fitting.
No fancy tools needed to fit this adaptor! Use 3-4 wraps of PTFE tape to seal thread to thread joins.
SOLD INDIVIDUALLY
A simple screw-on pipe clip to neatly hold 20mm polytube to walls, fences etc - just select a suitable screw fixing.
They can be linked together if several pipes need securing. Sold individually.
20mm to 16mm Compression Straight Adaptor
Sold Individually
20mm to 16mm compression adaptor for permanent, secure, leak-free connections between 20mm black LDPE supply polypipe or blue MDPE pipe AND 16mm black LDPE supply polypipe or garden hosepipe.
- Secure connection, seals on the external surface of pipe.
- Fits 20mm black LDPE supply polypipe click here to buy
- Fits 20mm blue MDPE supply pipe
20mm to 16mm compression adaptor for permanent, secure, leak-free connections between 20mm black LDPE supply polypipe or blue MDPE pipe AND 16mm black LDPE supply polypipe or garden hosepipe.
25mm Compression to LeakyPipe connector
(One or Two output options)
Connect 25mm blue 'mains' pipe to 1 or 2 lengths of LeakyPipe.
Use these fittings where the water is supplied to the garden in 25mm blue MDPE 'mains' pipe. The output end is a barbed fitting which simply pushes onto the LeakyPipe.
The following outputs are available.
12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal
25mm Compression Elbow Fitting
25mm compression elbow for permanent, secure, leak-free 90degree turns in 25mm black LDPE supply polypipe and blue MDPE pipe.
Secure connection, seals on the external surface of pipe.
Fits 25mm black LDPE supply polypipe click here to buy
