Garden Border Porous Hose Pipe Kit - 100m


In stock


Proven to last and relieve you from the work of watering your plant collections, everywhere. A kit of 100m of LeakyPipe with a selection of 27 connectors including HoseSnap fittings for Planters, Beds and Borders.

Try the original 100m roll of LeakyPipe® Hose Pipe Kit

✔ Designed to water newly planted and established herbaceous borders.

This watering kit includes a superb porous hose which weeps water along its length.

This is a cost-effective leaky pipe irrigation system to water your garden borders. Includes 100m roll of LeakyPipe® with push-fit barbed connectors. Cut the LeakyPipe® LP12H into lengths as you lay it out and connect together to your hosepipe or 16mm black, Supply Pipe.    You can work the whole 100metres at one time, evenly.

A typical household tap pressure can water up to 300m LeakyPipe at one time. So you won't need the tap on much for all  100metres to work! This high quality rubber hose pipe will not perish or be affected by frost.

✔ It is reasonably flexible so you can snake it back and forth to water your borders, beds and shrubs.
✔ Specifically designed to easily water newly planted and established herbaceous borders, trees and hedgelines shorter than 100m.
✔ Includes connectors. Always in stock!
✔ It has proven to last in excess of ten years.

Buy a reliable hose pipe kit & Save time to water your plants. Arrange as rings or spiral around newly planted trees to aid their establishment. It works most efficiently when covered by a mulch or soil as evaporation is reduced. Overall you use less water with LeakyPipe than watering by hand and it will work out-of-sight whilst you enjoy your garden.

This hose pipe kit uses LP12H LeakyPipe

The LP12H is designed to be ideal for general purpose watering. This garden hose pipe is specifically manufactured by us to work on top of the ground, if you wish, as well as sub-mulch, working up to 50metres from the barbed connections. See video information here.

Buy this great quality hose pipe kit, which includes:

- 100 metres of LeakyPipe LP12H Porous Rubber Hose. This LeakyPipe® is not designed to used from a water butt, without pumping.
- 5  of 16-12 Reducer Connectors (Supply to LeakyPipe®).
- 5 of 16-12-16 Reducer Tees (Supply-Leaky®-Supply).
- 1  of 16-16-16 Tees (Supply-Supply-Supply).
- 2  of 12-12-12 Tees (To "Branch" LeakyPipe® to itself). 
- 10 of 12 plugs (A tidy way to plug LeakyPipe® ends).
- 2 of 16 plugs (A tidy way of sealing 16 supply pipe).
- 2 of 12-12 connectors (To connect Leaky-Leaky).
- 1 of Hosesnap-12 connector (Hose to Leaky®)
- 1 of Hosesnap-12tee connector (Hose to two Leakies)

N.B. 16 will fit both Supply piping and 1/2" garden hose, (even though the latter is a tight fit).  Also available in 50m, 100m, 250m, 400m rolls, with and without connections.

See this narrated video on system concepts and design.

Or the silent Video about LeakyPipe layout in Gardens on the next tab 

Find a way of running the Supply tubing or hosepipe onto all the places you wish to water.  Use the connection fittings and a pair of cutters, to tailor the tubing to give you a "Distribution Network" to carry the water to where you will be connecting the Leaky Pipe with the reducing connections.  

Run the LeakyPipe® near to the plants, - (within 30-50cm as the water will spread laterally) and plug the ends. See this Video below about connection fittings. Technical information: Leak rate of 2-3L water per linear meter per hour at 1-2 Bar.


  • Free return shipping
  • First Class Royal Mail.
  • Some larger orders are signed for Royal Mail
  • Larger orders will be sent by courier and we use UKmail and DHL
  • Full Shipping Details here